Building Access Control Systems

Card Access System

a. Your access card is required to gain building elevator access to authorized floors from 6:00pm until 7:00am on weekdays, and all day on Saturdays and Sundays as well as on building holidays.  Card readers are located inside each elevator cab adjacent to the floor button panel. To activate an elevator, place your card in front of the reader until you hear a beep noise, then press the button for the floor you are authorized to access can be pushed and activated. After the elevator travels to the requested floor, the access system will reset, requiring use of an access card again for entry to another floor.  Access will be restricted to only your Company’s floor(s) as authorized by your employer. 

b. An access card is not required to exit any floor.  The elevators will automatically respond to a call, as normal, by pushing the call button on the floor which will take you to ground Floor 1 or 2.  

c. Each access card has a distinct number.  If your card is lost or stolen, please report it immediately to the Property Management Office so this card can be voided and a new replacement card can be issued from the Parking Property Management Office.  

Security Console

The security console, located in the lobby of the building is open 7:00am - 11:00pm Sunay - Thursday and 24 hours per day on Friday and Saturday.  The console is a control point for all building surveillance, alarm monitoring and communication equipment. If security personnel are not present at the console, they are located somewhere on the property and tending security matters. Please use the phone number posted at the console to contact the Security Ambassador.

Camera Surveillance

Cameras monitor ground floor freight elevator lobby and building entrances after hours.